Jun
23
2021

Corrugated cardboard Metal fence Advantages and disadvantages

Corrugated metal fencing above rock wall around house

Here’s our guide to the pros and cons of corrugated metal fencing, including different types, costs, and ideas for DIY designs.

A corrugated metal fence can be an attractive and modern property cabinet that includes features that make it a versatile option for property owners.

Much work has gone into promoting the manufacture of steel. The ability to approach higher temperatures during the refining process allows us to mix higher quality steels with amazing properties.

Today you can see beautiful wavy metal fences with attractive frames and beautiful colors that can be mixed and matched to suit the theme of your home along with your backyard, garden or patio. See other types of fences here.

What is a corrugated fence?

A corrugated fence is made of corrugated cardboard that has ridges and valleys, it is basically a sheet of metal that is bent and stretched to create waves that create a defined profile. The traditional profile, when you look at its sectional image, has a series of waves of equal height,

Today, there are a number of profiles for corrugated cardboard. Peaks and valleys across the surface of a corrugated board are for extra strength.

Valleys also act as channels for water, which is why these slabs are found on rooftops. The water flows down the canals and out onto the gutter.

With this type of configuration and the roof angle, the architect can figure out the optimal combination to ensure that dirt and water do not accumulate on the roof.

As for the chemistry of the metal, a coating of different metals is added to resist corrosion; Metals such as zinc and copper can be found as a common treatment.

Sheet metal is also environmentally friendly. Old and violent sheets do not have to be thrown away. These are recycled for other purposes, such as To build a chicken coop or for use as a roof for dog houses or other types of shelter that do not require a fully functional coating.

Useless metal sheets are sent to the recycling plant to be melted down and turned into a label again.

Now we break down the pros and cons of the corrugated metal fence so you can see if this type of fence is best for your needs.

Corrugated cardboard metal fencing benefits

Long span. The good thing about corrugated metal fences is that panel sets are available from 6 feet to 12 feet and 24 inches (2.1 feet) in width, making it possible to have solid fences on large properties.

Regular corrugated fence sizes are typically 24, 26 or 36 inches wide and 48 inches, 72 inches or 96 inches high. You can find some manufacturers that also offer custom lengths but may cost more than the standard lengths.

Quick and easy to install. Because it is a lightweight material, you can easily handle the metal plates regardless of the terrain or conditions you have on your property. The simple installation allows homeowners to carry out their metal fence installation as a DIY project.

It takes a long time. With an average lifespan of 25 to 30 years, it is a practical investment. There are also wavy metal fences in the middle class that can last from 30 to 40 years. For the thickest panels, you can expect the fence to last from 50 to 75 years with the best coating and care.

Versatile. You can easily cut the corrugated metal fence with pewter or circular saw to the thicker quality and the long sheets in the direction you want.

The easy handling and adaptation of the metal material makes it possible to integrate it with other materials such as wood or vinyl. It is also easy to install in sloping terrain, as no complicated foundation work is required to install the metal panels.

Easily accessible. Corrugated cardboard panels are available in building and hardware stores, and there is always a local contractor who can take on the installation. The metal panels are available in a wide range of quality settings, so you can easily find the right profile, color and gauge for your needs.

It is unlikely that you will come across metal fences that already come with the necessary framing materials. Sheets, frames, bolts, nails, cement, etc. Must be purchased separately. The requirements of the project will determine what materials and how much is needed.

Corrugated sheet metal is typically painted on one side only, unless it is a bulk order.

Striking appearance. While wood and UPVC are undoubtedly beautiful fencing materials, corrugated metal fences compete with these traditional fences with their modern look and versatility.

Depending on your fence design, you can achieve a minimalist look with a sleek and simple profile or get the rustic or industrial look of unpainted or in matte black metal panels.

Affordability. A corrugated sheet of metal is an affordable option for homeowners, and since it is so easy to install, it is a great DIY project. The easy transport, DIY installation and accessibility make it a cheaper option than most conventional fencing materials.

Corrugated Metal Fence Cons

Thin. A corrugated board privacy fence is generally durable and can withstand extreme weather conditions, but if installed with a poor framing design, it can be knocked out by strong winds.

Six to eight feet is a standard distance between your posts. One way to alleviate this thinness is by cementing the posts permanently.

Sharp edges. The sharp edges of the thin metal plate, especially when installed at a lower height, are dangerous. The edges of the panels should be framed to prevent children or pets from cutting themselves on these edges.

Potential for armor. Like any metal material, corrugated sheet metal can rust and corrode over time if left unattended, so you will need to repaint and varnish again for the worn surfaces.

Use the same galvanized material for your screws, bolts, and other fasteners used on your metal fence to prevent rust. But if you like the rustic look of metal fences, you can go for the non-galvanized metal sheets.

Costs for corrugated metal fences

A corrugated metal fence is an affordable option due to the low material, labor and maintenance costs. Since the cost is relative to the quality, where the thicker your metal gauges are more expensive, but still in general, even with the thicker gauges like 26 or 29.

On average, corrugated metal costs $ 10- $ 12 per linear foot compared to vinyl, which can cost around $ 20- $ 35 per linear foot, and wood is around $ 10- $ 18 per linear foot.

That said, it’s best to budget $ 4 to $ 8 + per person. Foot while taking into account labor costs.

Ideas for corrugated metal fences

Here are some of the best ideas for corrugated paper fencing for the home.

Walk horizontally

When you need to cover a long perimeter, a horizontal panel can visually impact instead of the typical vertical installation.

You can leave it without framing or install wooden frame for stability and create a popular look for your backyard.

Combine with bricks

Use masonry or stony posts at equal intervals through a bare corrugated metal fence to create an earthy look. The natural rust color combined with natural stone is a beautiful backdrop for any garden.

Wood plank style corrugated fence

A corrugated fence in wood plank style can give the look of natural wood. This type of fence can look more natural than a raw metal fence and give a more harmonious feel to your backyard.

Combine with wood

Corrugated cardboard and metal fences are a popular option because of how the two materials look good together as they complement their qualities. Wood and metal complement each other very well. Metal can seem cold and unnatural, while wood looks natural, so it has an organic look to it.

Corrugated metal fence on sloping terrain

Corrugated panels are sold by the board, are easily accessible, lightweight and easy to work with, making them ideal for fencing on sloping terrain. The fence is light enough to install, adjustments are easy in case of errors.

Custom corrugated fencing

You can turn your custom corrugated fence into an eye-catching work of art with different materials of corrugated cardboard, metal and stone alternately arranged as a chessboard. The result is an interesting mix of materials.

Corrugated cardboard Metal Privacy Fence

Housing markets and commercial markets found application in the use of corrugated fencing privacy fences. Professionals such as architects, builders and homeowners prefer this material over other alternatives such as wood or vinyl.

Privacy fence metal is durable enough to withstand a harsh environment. The service life is improved by also painting them with an extra protective coating, and they last even longer.

Metal fencing is low maintenance and in case it needs to be replaced, a new sheet can be easily installed. See more privacy protection ideas here.

DIY corrugated cardboard metal fence

Corrugated cardboard is poor in maintenance and does not need to be stained or treated (paint is optional). A fence of this type is virtually free of maintenance for a year, as long as you buy thick sheets of good quality.

Before you decide to install your fence, be sure to check with your local fencing installation laws. Make sure to secure the correct permissions (if necessary). Once approved, the fun begins.

Follow the correct procedures, such as Make sure your posts are 18 inches deep. Of course, this depends on the fence on the fence and other conditions. If you are in doubt about how to proceed, hire a professional to help you with the construction process.

To help create your own fence, there are various software programs for fence design. Many of these programs can help you decorate your fence, determine the amount of materials you need, and estimate the total cost.

Corrugated Cardboard Metal Fence Takeaway

Fencing your property is not the only function of a metal fence. It is used as a wind barrier in agricultural applications. It can act as a barrier against strong winds and snow to protect livestock in places experiencing winter.

If you need a cheap and easy to install fence, whether it is for a permanent or a temporary fence, you can bet your money that this is the best way to go.

There are companies that offer their services to people who need professional help with decisions such as determining the size, thickness or color of your fence.

What did you think of our list of pros and cons of corrugated metal fences? Tell us what you think below.